Grid view List view

Showing 17–32 of 42 results

Random Orbital Toolholders

Random Orbital Toolholders

Random Orbital Toolholders

Toolholders
PushCorp has designed a series of tool shafts to aid the customer when performing random orbital sanding operations. These are designed with counter weights and eccentrics based on the desired sanding disk diameter and orbit diameter. The 5″ & 6″ disc units are are tapped to accept 5/16-24 male threaded disks, while the 3″ disc units are tapped for 1/4-20. Disks are available from several abrasive manufacturers to support a wide variety of media. The following charts show the appropriate PushCorp Assembly number for a desired Sanding Disk Diameter & Orbit Diameter.

Select options This product has multiple variants. The options may be chosen on the product page
RBS372 Series

RBS372 Series

RBS372 Series

Robotic Belt Sander

The PushCorp RBS372 Robotic Belt Sander is an ideal solution for belt sanding applications. It features a 72 inch long belt for long, continuous sanding applications. The RBS372 has been designed from the ground up as a mid-sized belt sanding unit with many unique features. The RBS372 may be used to sand in three different ways – on its large steel platen, on the 7 inch (178 mm) contact wheel – specified at the time of purchase, or in the slack area of the belt media.

Select options This product has multiple variants. The options may be chosen on the product page
Robot and Spindle Brackets

Robot and Spindle Brackets

Robot and Spindle Brackets

PushCorp has designed a series of brackets to make integrating our equipment easier than ever. All of our Force Compliance Devices have a 90mm circular bolt pattern on the horizontal mounting plate. This 90mm bolt pattern can be mounted to any of the robot adapter plates in the “3D & 2D Downloads” section. If there is not a bracket for your robot in this list, we will make one!

We also have several different mounting plates and brackets to mount our spindles to the force compliance device. Whether you are mounting in the parallel or perpendicular configuration, these brackets make that easy. Unsure of what bracket you need or need something custom? Click over to the Contact Us page and get in touch with one of our application engineers today!

Select options This product has multiple variants. The options may be chosen on the product page
RPC100 – 75/125/150

RPC100 – 75/125/150

RPC100 Series

Robotic Paper Changer
The PushCorp Robotic Paper Changer or RPC100 provides an efficient and robust method to change abrasive sanding discs for finishing applications. This product is designed to be used with a robot and Random Orbital Sander, such as our Pnuematic ROS or any of our Electric Servo Spindles paired with a ROS Tool Holder.

The RPC100 allows a robot to change 75mm (3”), 125mm (5”), or 150mm (6”) paper autonomously through the application of pneumatic actuators, sensors, and removal blade within the RPC100. This makes it a perfect pairing for applications that use a large amount of abrasive discs with materials such as:

Wood
Composites
Metal
The RPC100 is comprised of a blade for removing the paper from a hook and loop pad, a cylinder for applying the paper to the pad, and sensors to verify that the process is completed successfully.

Select options This product has multiple variants. The options may be chosen on the product page
RPS100

RPS100

RPS100

High-Speed, Pneumatic Sander
The PushCorp RPS100 is an ideal solution for light-duty, robotic sanding. The sander features a replaceable, 1/4 Hp [179 W], pneumatic motor. The sander is a perfect, entry-level product to assist you in automating your sanding applications.

This equipment is designed to mount in a parallel or perpendicular orientation on the AFD310 and AFD72 force compliance devices. As a result, it has never been easier to program beautiful and consistent surface finishes

Select options This product has multiple variants. The options may be chosen on the product page
S724

S724

S724

Servo Amplifier

The S724 is manufactured by Kollmorgen and is used to power our Servo Spindles. This amplifier powers the servo spindle, provides feedback, and controls the spindle speed. There are several standard and optional control protocols for connecting to the drive.

Standard:

  • +/- 10VDC Analog
  • 24VDC
  • EtherCAT
  • CANopen
  • RS232

Optional Protocols:

  • Profibus
  • Sercos
  • Devicenet
  • Synqnet
  • 2CAN

Select options This product has multiple variants. The options may be chosen on the product page
SBS82 Series

SBS82 Series

SBS82 Series

Servo Belt Stand
The PushCorp SBS82 Servo Belt Stand combines compliant force control with a high-torque 5.7 hp [4.28 kW] servo motor. The precise force and speed control allow you to achieve unprecedented levels of quality and consistency.

The SBS82 Servo Belt Stand is designed to enable maximum flexibility for any robotic, part-in-hand, material-removal application. Linear travel compliance and excellent access allow a robot to easily manipulate parts over the belt media and perform the following operations:

Grinding (casting gates, weld beads)
Deburring (parting lines, chamfer)
Polishing (glass, wood, metal)
If the application will have impact loading, interrupted cuts, or require more torque, the SBS92 is the largest Belt Stand in the series. It features a robust set of linear bearings, can apply 215 lbf [956 N], and has 62 lb· ft [84 N·m] continuous stall torque.

The contact wheels of the SBS82 Servo Belt Stand are belt driven by a high-torque servo motor. This drive system has a 2:1 reduction that provides plenty of power at the contact wheels. The belt media is tracked remotely, keeping personnel out of the workcell during operation. Easily removable contact wheels allow widths of 1″, 2″, 3″, and 4″, plus a wide range of different rubber hardnesses. Changing the belt media is made quick and easy with pneumatic tension and conveniently positioned, manual valves.

Select options This product has multiple variants. The options may be chosen on the product page
SBS92 Series

SBS92 Series

SBS92 Series

Servo Belt Stand
The PushCorp SBS92 Servo Belt Stand combines compliant force control with a high-torque 16.5 hp [12.3 kW] servo motor. The precise force and constant speed allow you to achieve unprecedented levels of quality and consistency.

The SBS92 Servo Belt Stand is designed to enable maximum flexibility for any robotic, part-in-hand, material-removal application. Linear travel compliance and excellent access allow a robot to easily manipulate parts over the belt media and perform the following operations:

Grinding (casting gates, weld beads)
Deburring (parting lines, chamfer)
Polishing (glass, wood, metal)
The contact wheels of the SBS92 Servo Belt Stand are belt driven by a high-torque servo motor. This drive system has a 1.5:1 reduction that provides plenty of power at the contact wheels. The belt media is tracked remotely, keeping personnel out of the workcell during operation. Easily removable contact wheels allow widths of 1″, 2″, 3″, and 4″, plus a wide range of different rubber hardnesses. Changing the belt media is made quick and easy with pneumatic tension and conveniently positioned, manual valves.

Select options This product has multiple variants. The options may be chosen on the product page
SFS82 Series

SFS82 Series

SFS82 Series

Servo Finishing Stand
The PushCorp SFS82 Servo Finishing Stand combines compliant force control with a high-torque 5.7 hp [4.28 kW] servo motor. The precise force and speed control allow you to achieve unprecedented levels of quality and consistency.

The SFS82 Servo Finishing Stand is designed to enable maximum flexibility for any robotic, part-in-hand, material-removal application. Linear travel compliance and excellent access allow a robot to easily manipulate parts over the belt media and perform the following operations:

Deburring (parting lines, chamfer)
Polishing (glass, wood, metal)
If the application will require more torque, the SFS92 is the largest finishing stand in the series. It features a robust set of linear bearings, can apply 215 lbf [956 N], and has 62 lb· ft [84 N·m] continuous stall torque.

The SFS82 Servo Finishing Stand is belt driven by a high-torque servo motor. This drive system has a 2:1 reduction that provides plenty of power at the contact wheels.

Select options This product has multiple variants. The options may be chosen on the product page
SFS92 Series

SFS92 Series

SFS92 Series

Servo Finishing Stand
The PushCorp SFS92 Servo Finishing Stand combines compliant force control with a high-torque 16.5 hp [12.3 kW] servo motor. The precise force and speed control allow you to achieve unprecedented levels of quality and consistency.

The SFS92 Servo Finishing Stand is designed to enable maximum flexibility for any robotic, part-in-hand, material-removal application. Linear travel compliance and excellent access allow a robot to easily manipulate parts over the belt media and perform the following operations:

Deburring (parting lines, chamfer)
Polishing (glass, wood, metal)
The SFS92 features a robust set of linear bearings, can apply 215 lbf [956 N], and has 62 lb· ft [84 N·m] continuous stall torque. The SFS92 Servo Finishing Stand is belt driven by a high-torque servo motor. This drive system has a 1.5:1 reduction that provides plenty of power at the contact wheels.

Select options This product has multiple variants. The options may be chosen on the product page
SM0605

SM0605

SM0605

High-Torque, Robotic Servo Spindle
The PushCorp SM0605 high-torque servo spindle is an ideal solution for robotic, material-removal applications such as:

Robotic Grinding
Robotic Sanding
Robotic Polishing
Robotic Deburring

The SM0605 features a powerful 5.0 hp [3.8 kW] servo motor that provides constant speed. This equipment is designed to mount in a parallel or perpendicular orientation on the AFD310 and AFD72 force compliance devices. As a result, it has never been easier to program beautiful and consistent surface finishes.

Select options This product has multiple variants. The options may be chosen on the product page
SM0612

SM0612

SM0612

High-Torque, Robotic Servo Spindle
The PushCorp SM0612 high-torque servo spindle is an ideal solution for robotic, material-removal applications such as:

Robotic Grinding
Robotic Sanding
Robotic Polishing
Robotic Deburring

The SM0612 features a powerful 12.0 hp [9.0 kW] servo motor that provides constant speed. This equipment is designed to mount in a parallel or perpendicular orientation on the AFD620, AFD82, AFD1240, and AFD92 force compliance devices. As a result, it has never been easier to program beautiful and consistent surface finishes.

Select options This product has multiple variants. The options may be chosen on the product page
SM1202

SM1202

SM1202 Series

High-Speed, Robotic Servo Spindle
The PushCorp SM1202 high-speed servo spindle is an ideal solution for robotic, material-removal applications such as:

Robotic Grinding
Robotic Sanding
Robotic Polishing
Robotic Deburring
The SM1202 can be ordered in a Random Orbital Sander or ER Collet Configuration. The sander has a Random Orbital Shaft that is designed to balance a 3″, 5″, or 6″ backup pad. The part numbers for the various backup pad sizes and orbits can be seen in the table below. These sanders come standard with a dust collection shroud to extract dust from the parent material’s surface.

Select options This product has multiple variants. The options may be chosen on the product page
SM1202 Series

SM1202 Series

SM1202 Series

High-Speed, Robotic Servo Spindle
The PushCorp SM1202 high-speed servo spindle is an ideal solution for robotic, material-removal applications such as:

Robotic Grinding
Robotic Sanding
Robotic Polishing
Robotic Deburring
The SM1202 can be ordered in a Random Orbital Sander or ER Collet Configuration. The sander has a Random Orbital Shaft that is designed to balance a 3″, 5″, or 6″ backup pad. The part numbers for the various backup pad sizes and orbits can be seen in the table below. These sanders come standard with a dust collection shroud to extract dust from the parent material’s surface.

Select options This product has multiple variants. The options may be chosen on the product page
SM1503

SM1503

SM1503

High-Speed, Robotic Servo Spindle
The PushCorp SM1503 high-speed servo spindle is an ideal solution for robotic, material-removal applications such as:

Robotic Grinding
Robotic Sanding
Robotic Polishing
Robotic Deburring

The SM1503 features a powerful 3.0 hp [2.2 kW] servo motor that provides constant speed. This equipment is designed to mount in a parallel or perpendicular orientation on the AFD310 and AFD72 force compliance devices. As a result, it has never been easier to program beautiful and consistent surface finishes.

Select options This product has multiple variants. The options may be chosen on the product page
Standard Toolholders

Standard Toolholders

Robot and Spindle Brackets

PushCorp has designed a series of brackets to make integrating our equipment easier than ever. All of our Force Compliance Devices have a 90mm circular bolt pattern on the horizontal mounting plate. This 90mm bolt pattern can be mounted to any of the robot adapter plates in the “3D & 2D Downloads” section. If there is not a bracket for your robot in this list, we will make one!

We also have several different mounting plates and brackets to mount our spindles to the force compliance device. Whether you are mounting in the parallel or perpendicular configuration, these brackets make that easy. Unsure of what bracket you need or need something custom? Click over to the Contact Us page and get in touch with one of our application engineers today!

Select options This product has multiple variants. The options may be chosen on the product page