Grid view List view

Showing all 3 results

AFD62

AFD62

AFD62

AFD62 End Effector (EOAT)
The AFD62 is part of PushCorp’s Passive Compliance series. This end effector can apply up to 27 lbf [120 N] in any orientation. Unlike the active series, this equipment relies on an external air pressure regulator to set the applied force. This pressure must change when a new orientation is programmed in order to maintain a constant force. For this reason, the AFD62 is most commonly used for robotic, material-removal applications with flat or prismatic parts.

High speed spindles can be mounted to the AFD62. Together, they can automate a wide variety of light-duty, robotic processes:

Automated Grinding
Automated Sanding
Automated Polishing
Automated Deburring
Automated Deflashing
If the application requires a heavier spindle, our AFD72 is the third largest in the series. It can apply up to 60 lbf [267 N] and features a more robust set of linear bearings.

Select options This product has multiple variants. The options may be chosen on the product page
AFD72

AFD72

AFD72

The AFD72 is part of PushCorp’s Passive Compliance series. This end effector can apply up to 60 lbf [267 N] in any orientation. Unlike the active series, this equipment relies on an external air pressure regulator to set the applied force. This pressure must change when a new orientation is programmed in order to maintain a constant force. For this reason, the AFD72 is most commonly used for robotic, material-removal applications with flat or prismatic parts.

The STC1503-BT30, SM1503, STC0605-BT30, and SM0605 are servo spindles optimized to mount to the AFD72. Together, they can automate a wide variety of robotic processes:

Robotic Grinding
Robotic Sanding
Robotic Polishing
Robotic Deburring
Robotic Deflashing
If the application will have impact loading, interrupted cuts, or require a heavier spindle, our AFD82 is the second largest in the series. It features a more robust set of linear bearings and can apply 100 lbf [444 N].

Select options This product has multiple variants. The options may be chosen on the product page
AFD82

AFD82

AFD82

The AFD82 is part of PushCorp’s Passive Compliance series. This end effector can apply up to 115 lbf [511 N] in any orientation. Unlike the active series, this equipment relies on an external air pressure regulator to set the applied force. This pressure must change when a new orientation is programmed in order to maintain a constant force. For this reason, the AFD82 is most commonly used for robotic, material-removal applications with flat or prismatic parts.

The STC0612-BT40, SM0612, STC1015, and STC1515 are servo spindles optimized to mount to the AFD82. For weld shaving applications, our SWS100-3.7 or SWS100-7.2 would also be excellent pairings. Together, these products can automate a wide variety of robotic processes:

Automated Grinding
Automated Sanding
Automated Polishing
Automated Deburring
Automated Weld Shaving

If the application will have impact loading, interrupted cuts, or require a heavier spindle, our AFD92 is the largest in the series. It features an even more robust set of linear bearings and can apply 250 lbf [1112 N].

Select options This product has multiple variants. The options may be chosen on the product page